← Back to Dashboard

Wireless Router Configuration Wizard

Learn to configure wireless networks in a safe, simulated environment

ICTNWK311 - Configure Wireless LANs

SimNet Wireless Router

Model: SN-AC1900 | Firmware: 2.0.1

Connected (192.168.1.1)

System Status

Internet Connection

● Connected
203.45.167.89
DHCP
8.8.8.8, 8.8.4.4

LAN Configuration

192.168.1.1
255.255.255.0
● Enabled
5

Wireless Status

● Enabled
● Enabled
MyNetwork
WPA2-Personal

Wireless Settings

Tip: Choose a unique SSID name and avoid using personal information.

2.4 GHz Band Configuration

Enable 2.4 GHz Wireless Disable to turn off 2.4 GHz radio

1-32 characters. This name will be visible to devices searching for WiFi.

Channels 1, 6, and 11 don't overlap. Use Auto for best performance.

Channel Interference Map (2.4 GHz)

Click a channel to select it. Bar height shows interference from neighboring networks.

Low interference
Medium interference
High interference
SSID Broadcast Hidden networks require manual connection

5 GHz Band Configuration

Enable 5 GHz Wireless 5 GHz offers faster speeds but shorter range

Consider adding "-5G" suffix to distinguish from 2.4 GHz network.

Wireless Security

A

Excellent Security Configuration

Security Settings

WPA2 or WPA3 is strongly recommended. WEP is easily cracked.

Show

8-63 characters. Use a mix of letters, numbers, and symbols.

AES is more secure and faster than TKIP.

Additional Security Options

WPS (Wi-Fi Protected Setup) Allows easy device connection but has security vulnerabilities
MAC Address Filtering Only allow specific devices to connect
Client Isolation Prevent wireless clients from communicating with each other

Configuration Test Results

DHCP Server Settings

What is DHCP? DHCP automatically assigns IP addresses to devices on your network.

DHCP Configuration

Enable DHCP Server Automatically assign IP addresses to connected devices

How long devices keep their assigned IP address.

Usually the router's IP address.

Connected Devices (DHCP Leases)

Hostname IP Address MAC Address Lease Expires

Step-by-Step Configuration Guide

1
Connect
2
Configure SSID
3
Set Security
4
Channel Select
5
Verify

Before (Default Configuration)

SSID: Router_Default_12345
Security: WPA2-Personal
Password: admin123
Channel: Auto
DHCP: 192.168.1.100-200

After (Your Configuration)

SSID: MyNetwork
Security: WPA2-Personal
Password: **********
Channel: 6
DHCP: 192.168.1.100-200